INFRACTION : The ?inch diameter magnetic steel truck trailing arm mounting bolt was not installed horizontally.
3.
The setup consisted of a coil that could be moved up and down over the end of two magnetic steel bars.
4.
:* B . Truck trailing arm mounting brackets must be constructed of magnetic steel flat plate with a minimum thickness of 0.169 inch.
5.
Thus the reference depth can vary with temperature by a factor of 2-3 for nonmagnetic conductors, and by as much as 20 for magnetic steels.
6.
The stylus shaft was composed of the diamond tip, a short piece of soft iron, and an L-shaped cantilever made of non-magnetic steel.
7.
In 1914 Elstree Studios was founded, and acquired in 1928 by German-born Ludwig Blattner, who invented a magnetic steel tape recording system that was adopted by the BBC in 1930.
8.
:* E . The left and right side truck trailing arms must be mounted to the truck trailing arm mounting brackets using a one-piece, minimum ?inch diameter magnetic steel bolt.
9.
Like the earlier " Delta " class submarines the " Delta III " is a double hulled design with a thin low magnetic steel outer hull wrapped around a thicker inner pressure hull.
10.
The industry made significant technical advances in terms of vanadium, phospho-magnetic steels and other specialized high-strength alloys, using the electric furnace and other innovations, the devising of new techniques over the smoke issue.
मोबाइल